-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
HP DesignJet LX800
Error Codes List page 1
|
|
- Code: 01.0:03
- Description: Main PCA electronics error
- Causes: The Main PCA has failed to respond.
- Remedy: Switch the power off at the rear of the printer, wait briefly, then switch it back on again.
- Code: 01.0:10
- Description: Main PCA hardware failure
- Causes: Main PCA hardware failure.
- Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Replace the Main PCA.
- Code: 01.1.03
- Description: PrintMech PCA electronics error
- Causes: The PrintMech PCA has failed to respond.
- Remedy: Switch the power off at the rear of the printer, wait briefly, then switch it back on again.
- Code: 01.1.10
- Description: PrintMech PCA hardware failure
- Causes: PrintMech PCA hardware failure.
- Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Replace the PrintMech PCA.
- Code: 01.10:10
- Description: PrintMech PCA is faulty
- Causes: The PrintMech PCA is not disabling sine-wave converters when requested.
- Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Replace the PrintMech PCA.
- Code: 01.11:10
- Description: PrintMech PCA is faulty
- Causes: The PrintMech PCA is not enabling sine-wave converters when requested.
- Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Replace the PrintMech PCA.