Description: ATG/RSM Loading Error The program load from the Flash ROM on the Main PCA to the ASIC on the Main PCA or sum-check was not performed correctly and an error occurred.
Remedy: • Reinstall the Firmware. • Replace the Main PCA.
Code: 1011
Description: PTC/PDD Loading Error The program load from the Flash ROM on the Main PCA to the ASIC on the Carriage PCA or sum-check was not performed correctly and an error occurred.
Remedy: • Reinstall the Firmware. • Make sure that the Carriage Cable is NOT damaged and is correctly connected to the Carriage PCA and the Main PCA. • Replace the Carriage PCA. • Replace the Main PCA. • If the error continues, replace the Trailing Cable
Code: 1100
Description: Flash ROM Error The program area in the Flash ROM is sum-checked, and it could not be read, causing an error.
Remedy: • Reinstall the Firmware. • Replace the Main PCA.
Code: 1101
Description: ATG/RSM Error The read/write of the ATG/RSM registers and RSM Mask Memory Data on the Main PCA was diagnosed and an error was detected.
Remedy: • Replace the Main PCA.
Code: 1102
Description: Trailing Cable Error The Trailing Cable between the Main PCA and the Carriage PCA is not connected.
Remedy: • Reconnect the Trailing Cable to the Carriage PCA and the Main PCA. • Make sure that the Trailing Cable is not damaged. • Replace the Carriage PCA. • If the error continues, replace the Main PCA. • If the error continues after replacing the Main PCA and the Carriage PCA, replace the Trailing Cable.
Code: 1103
Description: Heater Relay Board Connection Error The Cable between the Main PCA and the Heater Relay Board is not connected.
Remedy: • Reconnect the Cable to the Heater Relay Board and the Main PCA. • Make sure that the Cable is not damaged. • Replace the Heater Relay Board. • If the error continues, replace the Main PCA.