Description: There is a shutter error.
While the shutter is in operation, the sensor signal is not detected and, in addition, it is still not detected after 3 retries.
Remedy: - Check the connection of the connector of the shutter motor and the shutter HP sensor. - check the mounting of the pin used to match the shutter gear phase of the fixing unit (See descriptions under "Points to Note When Mounting the Fixing Roller.") - Replace the shutter HP sensor and the shutter motor.
Code: E840-0002
Description: There is a shutter error.
The interval of ON-OFF detection by the sensor in response to shutter operation is shorter than a specific time period.
Remedy: - Check the connection of the connector of the shutter motor and the shutter HP sensor. - check the mounting of the pin used to match the shutter gear phase of the fixing unit (See descriptions under "Points to Note When Mounting the Fixing Roller.") - Replace the shutter HP sensor and the shutter motor.
Code: E841-0001
Description: There is an error in the detection of fixing inlet guide connection.
At power-on, the connection of the fixing inlet guide solenoid is not detected.
Remedy: - Check the connection of the connector. - Replace the solenoid.