Description: There is an error in the IPC communication.
The occurrence of an error has been recorded in the error register of the IPC chip 4 times or more within 1.5 sec.
Remedy: Check the cable.
Code: E711-0002
Description: There is an error in the IPC communication.
The occurrence of an error has been recorded in the error register of the IPC chip 4 times or more within 2 sec.
Remedy: Check the cable.
Code: E713-0000
Description: There is an error in the communication with the finisher.
The communication with the finisher does not resume within 5 sec after it has been disrupted.
Remedy: Check the cable. Replace the DC controller PCB. Replace the finisher controller PCB.
Code: E716-0000
Description: There is an error in the communication with the pedestal.
After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec
Remedy: Check the cable. Replace the DC controller PCB. Replace the pedestal drive PCB.
Code: E717-0001
Description: There is an error in the communication with the NE controller.
The NE controller is not connected at power on, although it was connected before the power was turned off because of an error.
Remedy: Check the cable; thereafter, reset the condition in service mode: COPIER>FUNCTION>CLEAR> ERR.
Code: E717-0002
Description: There is an error in the communication with the NE controller.
An IPC error has occurred while the NE controller is in operation. There is an open circuit for the IPC. An error has occurred, and the IPC communication remains disabled
Remedy: Check the cable; thereafter, reset the condition in service mode: COPIER>FUNCTION>CLEAR> ERR.