Description: There is an error on the HDD.
At startup, the HDD fails to reach a specific temperature level within a specific period of time.
Remedy: Replace the hard disk. Replace the DC controller PCB.
Code: E609-0009
Description: There is an error on the HDD.
At time of sleep recovery, the temperature fails to reach a specific level.
Remedy: Replace the hard disk. Replace the DC controller PCB.
Code: E610
Description: The HDD coding key is faulty.
The SRM/PCB is faulty. The battery has become exhausted, leading to loss of SRAM contents.
Remedy: Try step 1); if it fails, try step 2). 1) Turn off and then back on the power switch to generate the key once again. 2) If the same error still continues, replace the board on which the SRAM is mounted. (Keep in mind that doing so will lead to loss of all user data.)
Code: E674-0001
Description: An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.
An attempt to set mode for the fax device has failed.
Remedy: 1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB. 2. Replace the ROM DIMM of the fax control PCB (2-line). 3. Replace the fax control PCB (2- line). 4. Replace the main controller PCB.
Code: E710-0001
Description: There is an error in the initialization of the IPC.
The machine fails to become ready 3 sec or less after the IPC chip startup.
Remedy: Check the cable.
Code: E710-0002
Description: There is an error in the initialization of the IPC.
When the main power is turned on, the communication IC (IPC) on the DC controller PCB cannot be initialized.