Description: Thermistor disconnection detection error
Connector disconnection was detected for 30 msec on end.
Remedy: 1. Check the connector connection. (J206 on the DC Controller PCB, J101 on the Power Supply PCB) 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB (PCB1).
Code: E010-0001
Description: Main Motor (M2) rotation error
Detection was performed every 100 msec since the start of drive and there had been no lock detection signal in 2 seconds.
Remedy: 1. Check the connector between the Main Motor and the DC Controller PCB (J203). 2. Replace the Main Motor (M2). 3. Replace the DC Controller PCB (PCB1).
Code: E010-0002
Description: Main Motor (M2) rotation error
Detection was performed every 100msec during the drive (after the lock detection) and the lock signal was not detected 5 times in a row (in 500 msec).
Remedy: 1. Check the connector between the Main Motor and the DC Controller PCB (J203). 2. Replace the Main Motor (M2). 3. Replace the DC Controller PCB (PCB1).
Code: E013-0001
Description: Error in rotation of Waste Toner Motor (M3)
Lock detection flag was monitored every 2msec, and the same level was detected 600 times in a row.
Remedy: 1. Check the connector connection between the Waste Toner Motor and the DC Controller PCB (J209). 2. Replace the Waste Toner Motor (M3). 3. Replace the DC Controller PCB (PCB1).
Code: E014-0001
Description: Fixing Motor (M1) rotation error
Detection was performed every 100 msec since the start of drive and there had been no lock detection signal in 2 seconds.
Remedy: 1. Check the connector connection between the Fixing Motor and the DC Controller PCB (J203). 2. Replace the Fixing Motor (M1). 3. Replace the DC Controller PCB (PCB1)
Code: E014-0002
Description: Fixing Motor (M1) rotation error
Detection was performed every 100 msec during the drive (after the lock detection) and the lock signal was not detected 5 times in a row (in 500 msec).
Remedy: 1. Check the connector connection between the Fixing Motor and the DC Controller PCB (J203). 2. Replace the Fixing Motor (M1). 3. Replace the DC Controller PCB (PCB1).