-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon iPF5100
Error Codes List page 26
|
|
- Code: E196-4045
- Description: main controller PCB error. The main controller PCB is defective.
- Causes: Firmware or main controller PCB
- Remedy: 1. Upgrade the firmware. 2. Replace the main controller PCB.
- Code: E196-4049
- Description: main controller PCB error. The main controller PCB is defective.
- Causes: Firmware or main controller PCB
- Remedy: 1. Upgrade the firmware. 2. Replace the main controller PCB.
- Code: E198-401C
- Description: RTC error. The RTC of the main controller is not found. The battery capacity is low.
- Causes: Lithium battery or main controller PCB.
- Remedy: 1. Start up the printer in the service mode, and then turn off the power. 2. Replace the lithium battery. 3. Replace the main controller.
- Code: E198-401D
- Description: RTC error. The RTC of the main controller is not found. The battery capacity is low.
- Causes: Lithium battery or main controller PCB.
- Remedy: 1. Start up the printer in the service mode, and then turn off the power. 2. Replace the lithium battery. 3. Replace the main controller.
- Code: E198-401E
- Description: RTC error. The RTC of the main controller is not found. The battery capacity is low.
- Causes: Lithium battery or main controller PCB.
- Remedy: 1. Start up the printer in the service mode, and then turn off the power. 2. Replace the lithium battery. 3. Replace the main controller.