-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon i-SENSYS LBP6670dn
Error Codes List page 7
|
|
|
- Code: E748 2012
- Description: System error
- Causes: System error
- Remedy: Contact the service company office
- Code: E760 0000
- Description: Firmware error
- Causes: An error due to the controller software occurred so that print could not be proceeded.
- Remedy: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the downloaded firmware again.
- Code: E805 0000
- Description: Main Fan error
- Causes: Main Fan failure is detected.
- Remedy: 1. Check the Main Fan or the connector. 2. Replace the Main Fan 3. Replace the Main Controller PCB.
- Code: E808 0001
- Description: Failure detection of Low Voltage Power Supply PCB
- Causes: Failure detection of Low Voltage Power Supply PCB
- Remedy: 1. Check the connection of the Engine Controller or the connector. 2. Replace the Engine Controller PCB.