Canon NP8580

• Code: E402
• Description: The number of pulses in a 200 ms period is too low.

• Code: E403
• Description: When the number of feed motor clock pulses in a 200 ms period is less than the correct value.

• Code: E411
• Description: When the sensor output is greater than 2.3V when there is paper.

• Code: E500
• Description: When an abnormality in communication occurs between the DC controller PCB of sorter detect main controller PCB.

• Code: E510
• Description: When there is no pulse output from the feed roller motor and when the first copy jams.

• Code: E540
• Description: The lead can HOME position sensor does not go "OFF" within 0.5 second after the BIN MOTOR DRIVE signal (BMON) is output.