-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Brother MFC9130CW
Error Codes List page 24
|
|
- Code: E000
- Display: Print Unable E0 Turn the power off and then back on again.
- Description: Some ROM checksum error occurred.
- Causes: Main PCB failure
- Remedy: Replace the main PCB ASSY.
- Code: E100
- Display: Print Unable E1 Turn the power off and then back on again.
- Description: Program error.
- Causes: Main PCB failure
- Remedy: Replace the main PCB ASSY.
- Code: E500
- Display: Print Unable E5 Turn the power off and then back on again.
- Description: Error occurred when DRAM on the main PCB ASSY was accessed.
- Causes: Main PCB failure
- Remedy: Replace the main PCB ASSY.
- Code: E600
- Display: Print Unable E6 Turn the power off and then back on again.
- Description: Error occurred during writing to EEPROM on the main PCB ASSY.
- Causes: Main PCB failure
- Remedy: Replace the main PCB ASSY.
- Code: EC00
- Display: Unusable Device Remove the Device. Turn the power off and back on again.
- Description: Overcurrent was caused because a USB device that did not meet the specifications was inserted into the USB port.
- Causes: 1 USB host PCB failure 2 Main PCB failure
- Remedy: Replace the USB host PCB ASSY. Replace the main PCB ASSY.
- Code: F900
- Display: -
- Description: Setting by country code is not entered.
- Causes: 1 During function code 74, power is turned OFF. 2 Main PCB failure
- Remedy: Enter the Setting by country code again. Replace the main PCB ASSY.