Xerox WorkCentre 3025NI
Diagnostic Mode. 7 Firmware Upgrade
GP 7 Firmware Upgrade
Purpose
Use this procedure to update the machine firmware using the USB port or via the network.
Requirements
- Wired or wireless connection to upgrade using the network.
- The usblist2.exe tool, located in the GSN website, installed on the PWS device. (Ref. GPX)
- Correct firmware file for update.
- Firmware Upgrade must be enabled in the machine settings on the printer.
- Complete or delete all jobs in the printer queue before initiating a firmware upgrade.
Procedure
Upgrading the Firmware using a USB Port:
- Connect a USB cable from the PWS to the USB port on the printer.
- Confirm that the printer is the Ready status.
- To enable firmware upgrades on the device:
• Drag the SWUPGRADE_ON.prn file and drop it onto usblist2.exe.
or
• In Diagnostic Mode, select [Data Setup>F/W Upgrade>On]. Press the <OK> button to confirm menu selections. - Drag and drop the firmware file onto usblist2.exe. The firmware update will start automatically.
- The printer will reboot when upgrade is complete.
Upgrading the Firmware using the Network:
- Open a web browser and enter the machine’s IP address.
- Select [Enter]. The CentreWare Internet Services window will open.
- Select the [Login] link at the top of the screen.
- Enter the Administrator username (admin) and password (1111). The Firmware Upgrade window will open.
NOTE: It may be necessary to obtain the username and password from the customer if they have been changed. - Click on the [Properties] tab.
- In the [Security link], select [System Security].
- Select the [Feature Management] link in the directory tree.
- Select the [Firmware Upgrade Enable] box.
- Click [Apply] to save the changes.
- Select the [Support] tab.
- In the [Firmware Upgrade] link, select the [Upgrade Wizard] button.
a. In the Firmware File area, select [Browse].
b. Locate and select the correct firmware upgrade .hd file.
c. Select [Open]. - c. Select [Open].
- Select [Next]. The firmware will now be verified and display information about the upgrade.
- Select [Next] to continue. The upgrade should take approximately 10 minutes.
- The machine will reboot automatically when the upgrade has completed.
- Print a Configuration Report and verify that the firmware has been successfully upgraded.