Sharp MXM160
Simulation mode. 1 Entering
Entering the simulation mode
Perform the following procedure to enter the simulation mode.
[#] key → [*] key → [C] key → [*] key →
Main code → [START] → key Sub code → [START] key
Canceling the simulation mode
When the [CA] key is pressed, the simulation mode is cancelled. When the interruption key is pressed, the process is interrupted and the screen returns to the sub code entering display.
*After canceling the simulation mode, be sure to turn OFF/ON the power and check the operation.
Note:
If the machine is terminated by a jam error or paper empty during copying in the adjustment by the simulation, recopying is required.
Note:
The values in the simulation columns are not default values but sample values.