Sharp MXC305W
Simulation mode. List of classic mode. Codes 63-11 - 67-54
Sim No. | Content | Easy Mode | ||
---|---|---|---|---|
Installation | Maintenance | Adjustment and Settings | ||
63-11 | Used to set the target color balance of the copy mode auto color balance adjustment | 5 | ||
64-1 | Test print (self print) (color mode) | |||
64-2 | Test print (self print) (monochrome mode) | 8 | ||
64-4 | Printer test print (self print) | |||
64-5 | Printer test print (self print) (PCL) | 1-4 | ||
64-6 | Printer test print (self print) (PS) | |||
65-1 | Used to adjust the touch panel (LCD display section) detection coordinates | 7 | ||
65-2 | Used to display the touch panel (LCD display section) detection coordinates | |||
65-5 | Used to check the operation panel key input | |||
66-1 | Used to display the image send-related soft SW (2-150) on the LCD to allow changing the soft SW while checking with the LCD | 2-3 | ||
66-2 | Used to enter a country code and set the default value for the country code | |||
66-3 | Used to check read/write of the EEPROM and the SDRAM on the MODEM controller and display the result |
|||
66-4 | Used to send the selected signals to the line and the main unit speaker (send level: max) | |||
66-5 | Used to send the selected signal to the line and the main unit speaker (send level: soft SW setting) | |||
66-6 | Used to print the confidential registration check table (BOX No, BOX name, pass code | |||
66-7 | Used to output all image data saved in the image memory | |||
66-8 | Used to send the selected sound message to the line and the speaker (send level: max) | |||
66-9 | Used to send the selected sound message to the line and the speaker (send level: soft SW setting) | |||
66-10 | Used to clear the FAX and image send image data | |||
66-11 | Used to send the selected signal at 300bps to the line and the speaker (send level: max) | |||
66-12 | Used to send the selected signal at 300bps to the line and the speaker (send level: soft SW setting) | |||
66-13 | Used to register dial number for Sim66-14/ 15/16 dial test | |||
66-14 | Used to execute the dial pulse (10pps) send test and to adjust the make time | |||
66-15 | Used to execute the dial pulse (20pps) send test and to adjust the make time | |||
66-16 | Used to execute the DTMF signal send test and to adjust the send level | |||
66-17 | Used to send the DTMF signal to the line and the speaker (send level: max) | |||
66-18 | Used to send the DTMF signal to the line and the speaker (send level: soft SW setting) | |||
66-21 | Used to print the selected items (system error, protocol monitor) | |||
66-29 | Used to initialize the telephone book data and FAX system error | |||
66-30 | Used to display the TEL/LIU status change, the display is highlighted by status change | |||
66-31 | Used to set ON/OFF the port for output to TEL/LIU | |||
66-32 | Used to check the fixed data received from the line and to display the result | |||
66-33 | Used to execute detection of various signals with the line connected and to display the detection result. When a signal is detected the display is highlighted | |||
66-36 | Used to check send and receive data from the MODEM controller to the MFP controller or the data line or the command line individually |
|||
66-39 | Used to check and change the destination setting saved in EEPROM of the FAX BOX | |||
66-42 | Used to rewrite the program to power control installed in the FAX BOX | |||
66-43 | Used to write the adjustment value into the power control installed in the FAX BOX | |||
66-61 | Used to display the image send-related soft SW (151-250) on the LCD to allow changing the soft SW while checking with the LCD | |||
66-62 | Used to import the FAX receive data into a USB memory in PDF file type | |||
67-17 | Printer reset | |||
67-20 | Output auto adjustment | 1-3 | ||
67-21 | Out put manual adjustment | |||
67-24 | Printer color balance adjustment (Auto adjustment) | 6 | ||
67-25 | Printer color balance adjustment (Manual adjustment) | 1-4 | 6 | |
67-26 | Used to set the target color balance of the printer mode auto color balance adjustment | 6 | ||
67-27 | Used to set the service target of the printer mode auto color balance adjustment | 6 | ||
67-28 | Used to set the default of the service target of the printer mode auto color adjustment | 6 | ||
67-31 | Used to clear the printer calibration value | |||
67-33 | Used to change the gamma of the printer screen |
|||
67-34 | Used to set the density correction in the printer high density section | |||
67-36 | Used to adjust the density in the low density section | |||
67-41 | Used to set 2 color print | |||
67-42 | Used to set 2 color print color density | |||
67-43 | Used to adjust 2 color mode color balance | |||
67-46 | Used to adjust the image enhancement | |||
67-52 | Used to set the default of the gamma of the printer screen | 1-3 | ||
67-54 | Printer color balance adjustment | 1-3 |