Sharp MXB476W
Maintenance. 2. Display of maintenance execution timing 1
The message of maintenance execution timing is displayed when each counter reaches the set value. The relations between the message and the counters are shown below.
A. Maintenance counter
Display content | Display condition | Print JOB Enable/ Disable |
||
Sim26-38-A set value | Counter name | Counter value | ||
Maintenance required: TA | 0 (Print continue) | Maintenance counter (Total) | When SIM21-1 set value is reached |
Enable |
1 (Print stop) | When 90% of SIM21-1 set value is reached | |||
Maintenance required: TA | 1 (Print stop) | When SIM21-1 set value is reached |
Disable |
* After execution of maintenance, be sure to execute SIM24-4 to clear the maintenance counter (Total).
B. Transfer unit
Display content |
Display condition |
Print JOB Enable/ |
||
Sim26-38-A set value |
Counter name |
Counter value |
||
Maintenance required: TK |
0 (Print continue) |
Transfer roller print counter |
When 100K is reached |
Enable |
1 (Print stop) |
* After execution of the maintenance, execute SIM24-4 to clear the print counter, the accumulated rotation counter and the use day counter of TC ROLLER.
C. Fusing unit
Display content | Display condition | Print JOB Enable/ Disable |
||
Sim26-38-A set value | Counter name | Counter value | ||
Maintenance required: FK1 | 0 (Print continue) | Fusing roller print counter | When 100K is reached | Enable |
1 (Print stop) | ||||
Maintenance required: FK2 | 0 (Print continue) | Pressure roller print counter | Enable | |
1 (Print stop) |