Sharp MXB476W
Simulation mode. 1 Entering
1. General and purpose
The simulation mode has the following functions, to display the machine operating status, identify the trouble position and causes in an earlier stage and to efficiently setup and adjust the machine for improved serviceability.
- Various adjustments
- Setting of the specifications and functions
- Canceling troubles
- Operation check
- Counters check, setting clear
- Machine operating conditions (histories) data check, clear
- Various (adjustments, setting, operation, counters, etc) data transport.
The operating procedures and displays depend on the design of the operation panel of the machine.
There are two simulation modes.
Easy mode
Displays commonly used simulations for each category, allowing easy access for technicians to change settings, perform maintenance and adjustments.
Classic mode
All simulations are listed and can be accessed by entering the main code, then sub code as per previous model series.
2. Function of each key
No. | Name | Function |
---|---|---|
1 | TEST key | Change test mode |
2 | Mode setting key | Change Easy mode, Classic mode |
3 | Language setting key | Change language in simulation mode |
4 | INFO key | Display operation of current display |
5 | EXIT key | Exit from simulation mode |
6 | BACK key | Back to the previous display |
7 | Clear key | Clear input value |
3. Starting the simulation
Entering the simulation mode.
- Double-click the HOME key
- Touch the Ver display section (10-key mode input mode screen)
- Touch the (#) key → Asterisk (*) key → Clear key → Asterisk (*) key → Ready for input of main code of simulation.