Kyocera ECOSYS M6026cdn
Troubleshooting. Jam Codes: 4211 - 9401
*: Refer to figure for paper jam location
Code | Contents | Conditions | Jam location* |
---|---|---|---|
4211 | Eject sensor stay jam | The eject sensor (ES) does not turn off during paper feed from cassette. | D |
4212 | The eject sensor (ES) does not turn off during paper feed from paper feeder 1. | D | |
4213 | The eject sensor (ES) does not turn off during paper feed from paper feeder 2. | D | |
4218 | The eject sensor (ES) does not turn off during paper feed from duplex section. | D | |
4219 | The eject sensor (ES) does not turn off during paper feed from MP tray. | D | |
4220 | Eject sensor remaining jam | The eject sensor (ES) is turned on when the power is turned on. | D |
9000 | No original feed | The DP timing sensor (DPTS) does not turn on within specified time during the first sheet feeding (Retry 5 times). | H |
9001 | An original jam in the original conveying section | DP timing sensor (DPTS) turns off within the speci- fied time since the sensor turns on. | H |
9003 | An original jam in the original switchback section 1 | During duplex switchback scanning, the DP timing sensor (DPTS) does not turn off within specified time. | H |
9004 | An original jam in the original switchback section 2 | During duplex switchback scanning, the DP timing sensor (DPTS) does not turn on within specified time since original switchback operation starts. | H |
9011 | DP top cover open | The DP or DP top cover is opened during original feeding. | H |
9401 | An original jam in the original conveying section | The DP timing sensor (DPTS) does not turn off within specified time of the DP timing sensor (DPTS) turning on. | H |