Konica-Minolta bizhub C250P
Troubleshooting. Jam 2. Misfeed at Tray 1 feed section
Detection Timing
Type | Description |
---|---|
Detection of misfeed at Tray 1 feed section | The leading edge of the paper does not block the Registration Roller Sensor (PC1) even after the lapse of a given period of time after the Tray 1 Paper Feed Clutch (CL2) has been energized. |
Tray 1 Feed section Loop Registration Reversing JAM | Rise timing of load for registration is earlier than the one for making the loop at front of the Registration Roller at Tray 1 feed. |
Relevant Electrical Parts
Tray 1 Paper Feed Clutch (CL2)
Registration Roller Sensor (PC1)
Mechanical Control Board (PWB-M)
Action
Step | Action |
---|---|
1 | Initial check items |
2 | PC1 I/O check, Sensor check |
3 | CL2 operation check |
4 | Change PWB-M |