Konica-Minolta bizhub C250P
Service Mode. Password
Admin. Password
Functions
• To set and change the Administrator Password.
Use
• Use to change the Administrator Password.
• Use this function when the administrator forget the Administrator Password because a new password can be set without entering the current Administrator Password with this.
Setting/ Procedure
• Enter the Administrator Password (8 digits) on the on-screen keyboard.
• The initial setting is “12345678.”
New Password : Enter the new Administrator Password.
Retype Password : Enter the new Administrator Password again.
NOTE
• When the following setting leads to the Password Rules [Enable], the password with the same letters, the password which is same as the previous one and the password of less than eight digits cannot be changed. [Admin. Setting] ¨ [Security Setting]
Service Password
Functions
• To set and change the Service Password.
Use
• Use to change the Service Password.
Setting/ Procedure
• Enter the Service Password (8 digits) on the on-screen keyboard.
• The initial setting is “92729272.”
Password : Enter the currently using Service Password.
New Password : Enter the new Service Password.
Retype Password : Enter the new Service Password again.
NOTE
• When the following setting leads to the Password Rules [Enable], the password with the same letters as well as the password which is same as the previous one cannot be changed. [Admin. Setting] ¨ [Security Setting]
• NEVER forget the Service password. When forgetting the Service password, call responsible person of KONICA MINOLTA.