Konica-Minolta bizhub C250
Troubleshooting. Jam 05. Misfeed at Manual Bypass feed section
Detection timing
Type | Description |
---|---|
Detection of misfeed at Manual Bypass feed section | The leading edge of the paper does not block the Registration Roller Sensor (PC1) even after the lapse of a given period of time after the Bypass Paper Feed Clutch (CL5) has been energized. |
Manual Bypass feed section Loop Registration Reversing JAM | Rise timing of load for registration is earlier than the one for making the loop at front of the Registration Roller at Bypass feed. |
Relevant electrical parts
Registration Roller Sensor (PC1)
Bypass Paper Feed Clutch (CL5)
Mechanical Control Board (PWB-M)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PC1 I/O check, Sensor check | PWB-M CNSEN-3 (ON) | C-3 |
3 | CL5 operation check | PWB-M CNTRY1-2 (ON) | C-7 to 8 |
4 | Change PWB-M |