Canon imageRUNNER Advance C3530F III
Service Mode. Menu
Press the button in the service mode menu to display the initial screen of each mode. The differences between these modes are described below.
MODELIST
In this mode, functions for referring to each item in service mode, etc. are available.
Updater
This button is used to access the CDS and UGW servers and update system software.
BACKUP
This button is used to back up the service mode setting values.
RESTORE
This button is used to restore the service mode setting values backed up by [BACKUP].
SITUATION
This function displays service mode items according to the situation.
LUI MASK
This button is used to display a mask screen to prevent operations from being performed from the Control Panel while the
service mode is being accessed from a remote PC.
Description of Service Mode Items
The description of the initial screen, the main items, the intermediate items and the sub items can be displayed. After selecting any item of the initial screen, main item, the intermediate item or the sub item, pressing āiā (Information Button) displays the description of the selected item (hereinafter referred to as the service mode contents).
CAUTION:
- Displayed language of the service mode contents can be selected from J/E/F/I/G/S/C/K/T.
- The service mode contents can be upgraded using SST or a USB flash drive just like other system software.
- Press the [i] button
- The title of each sub item is displayed.
To check the details of each item, select the relevant item and press the [i] button. - A detailed description of the sub item (specifications and use methods, setting screen, etc.) is displayed.
Switching the Screen Display (Level 1 <->2)
Switching of screens between Level 1 and Level 2 becomes easier.
By pressing <LEVEL 1> at the upper right of the screen while Level 1 screen is displayed, the screen is switched to Level 2 screen.
NOTE:
This key combination can be used to enter the Level 2 screen.
ā¢ Mode List screen > [Settings/Registration] > [2]