Description: Network I/F Initialize has not been completed
Causes: Network I/F does not work correctly. Firmware for Network I/F is not installed.
Remedy: Check if the firmware is installed into Network I/F. Main Board replacement
Code: 0101
Description: Limit Position Initialize in the Service Mode has not been done.
Causes: Limit Position Initialize has not been done. Limit Position Initialize is ended before it is completed.
Remedy: Complete Limit Position Initialize correctly.
Code: 0102
Description: Head Lock Sensor is ON when it should be OFF, or vice versa.
Causes: Head Lock Sensor does not work correctly or is broken. Head Carriage is not located at the correct position.
Remedy: Head Lock Sensor replacement Check the mechanical backlash or loose with the scan axis related parts.
Code: 0103
Description: Limit Sensor is ON when it should be OFF, or vice versa.
Causes: Limit Sensor does not work correctly or is broken. Tool Carriage is not located at the correct position.
Remedy: Limit Sensor replacement Check the mechanical backlash or loose with the scan axis related parts.
Code: 0104
Description: Capping unit does not work correctly.
Causes: Capping Motor does not work correctly or is broken. Capping Unit does not work correctly or is broken. Capping Sensor does not work correctly or is broken. Wiring or Flexible Cable has short circuited or cut-line.
Remedy: Capping Motor replacement Capping unit replacement Capping Sensor replacement Flexible Cable replacement
Code: 0105
Description: Tool Carriage Connection Error
Causes: Fault of Tool Carriage Connection Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.
Remedy: Check the mechanical Backlash or loose with the Tool Carriage part. Connection Part Replacement Limit Position Initialize