HP Latex 3000

Error Code:

Code: 22.02.11:06 ... 22.02.72:06
Description: Intermediate tank ink broken bag XY. Run IDS diagnostic. If the problem persists, call your support representative
Causes: a. Ink in the air lines coming from the intermediate tank. b. Ink on the interconnect PCA or intermediate tank connector. c. Wet or dirty EE contacts.
Remedy: 1. If (a) is true, replace the intermediate tank (see ISM intermediate tank) and run the "Intermediate tanks refill (by time)" diagnostic. Drain the air bottle and clean the air tubes. 2. If (b) or (c) are true, just clean the affected parts. Then run the "Intermediate tank broken bag recovery" diagnostic to check the error condition and clear the error flag.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home