Canon iR3300
- Code: E110-0000
- Description: The motor ready signal does not arrive within 15 sec after the laser scanner motor drive signal is generated
- Causes: The wiring is faulty (short circuit, open circuit, disconnection). The laser scanner motor (M10) is faulty. The main power supply PCB is faulty. The DC controller PCB is faulty.
- Remedy: 1. Connector Are the connector (J312) on the DC controller PCB and the relay connector connected securely? NO: Connect the connectors securely. 2. Main power supply PCB During printing, does the voltage between J204-1 (+) and J204-2 (-) on the main power supply PCB change from 0 to about 24 V? NO: Replace the main power supply PCB. 3. Laser scanner unit, DC controller PCB Try replacing the laser scanner unit. Is the problem corrected? YES: End. NO: Replace the DC controller PCB.
Error Code | |
Service Mode, Troubleshooting | |
Parts Catalog | |
Compatibility | |
Downloads Files | |
Home |
Send message to us