Toshiba 5540C error CE40, CA00

Toshiba copiers, printers
The Anh Nguyen
Posts: 2
Joined: Tue Nov 07, 2017 4:42 pm

Toshiba 5540C error CE40, CA00

Postby The Anh Nguyen » Tue Nov 07, 2017 4:58 pm

Toshiba 5540C error CE40, CA00. Help me ! Thanks All.
User avatar
Serviceman
Posts: 10
Joined: Sat Oct 21, 2017 9:37 pm

Re: Toshiba 5540C error CE40, CA00

Postby Serviceman » Wed Nov 08, 2017 12:23 pm

Image control related service call
CA00 Image control related service call: Color registration abnormality
CE40 Image quality control test pattern abnormality: The test pattern is not formed normally.

Solution:
1. Based on the procedure of [CE10], [CE20] and [CE40] described below, check the status and take appropriate actions. And then perform the forced performing of image quality control initialization to the following procedure.
1.1. While pressing [0] and [5] simultaneously, turn ON the power.
1.2. Key in [2742], and then press the [START] button. Confirm that the image quality control has finished normally.

2. After confirming the items in (1), clear the abnormal detection counter of image quality control.
2.1. While pressing [0] and [8] simultaneously, turn ON the power.
2.2. Key in [2528], and then press the [START] button.
2.3. Rewrite the displayed status counter from “1” - “16” to “0”, and then press the [OK] or [INTERRUPT] button.
2.4. Key in [2529], and then press the [START] button.
2.5. Rewrite the displayed status counter from “1” - “16” to “0”, and then press the [OK] or [INTERRUPT] button.
2.6. Key in [2530], and then press the [START] button.
2.7. Rewrite the displayed status counter from “1” - “16” to “0”, and then press the [OK] or [INTERRUPT] button.
2.8. Key in [2531], and then press the [START] button.
2.9. Rewrite the displayed status counter from “1” - “16” to “0”, and then press the [OK] or [INTERRUPT] button.
2.10. Turn the power OFF and then back ON. Make sure that the equipment enters the normal ready state.
The Anh Nguyen
Posts: 2
Joined: Tue Nov 07, 2017 4:42 pm

Re: Toshiba 5540C error CE40, CA00

Postby The Anh Nguyen » Wed Nov 08, 2017 12:56 pm

Thank you very much !!!
WarnerRix
Posts: 4
Joined: Fri Dec 21, 2018 10:04 pm
Location: Panama
Contact:

Toshiba 5540C error CE40 CA00

Postby WarnerRix » Mon Dec 24, 2018 2:05 pm

so its not just me. You can just power off/on after this error and it will work as expected, assuming its in good shape.
TimothywaB
Posts: 7
Joined: Fri Jan 25, 2019 7:39 am
Location: Denmark
Contact:

Toshiba 5540C error CE40 CA00

Postby TimothywaB » Fri Feb 01, 2019 7:18 pm

Well its 2016 and Im looking for a copy of Toshiba A30 HD-DVD player firmware upgrade V.4. Can anyone help?
Henryemiva
Posts: 10
Joined: Sun Feb 03, 2019 12:50 am
Location: Sri Lanka
Contact:

Toshiba 5540C error CE40 CA00

Postby Henryemiva » Sun Mar 17, 2019 12:02 pm

I have played several of these HD DVD movies before, the error message is showing up now.

Thanks,

Geoallenbob
byronFreno
Posts: 8
Joined: Tue Apr 30, 2019 9:35 am
Location: Norway
Contact:

Toshiba 5540C error CE40 CA00

Postby byronFreno » Fri May 03, 2019 8:48 pm

Hello everybody. It's my another attempt to repair my bricked gigabeat s. Here are some answears for some unansweared qyestions that has appeared before.

State 1 Gigabeat starts with blue "gigabeat" screen. After a while it gives an error 5. In this state device is visible by windows My computer as MTP Device Upgradeing firmware by using original application crushes with an error "failed to send..." even though it has found the device before and has started the sending procedure. While useing the beastpatcher.exe I've got this:

infofoun device "toshiba gigabeat s"
info device version: "0"
info sending firmware...

err error occured during sending.
err botloader instal failed.

State 2 Gigabeat starts with blue "gigabeat" screen. I'm pushing left button on the cross and the windows button. Device starts with error triangle 3 Is not seen by win as MTP device. Also beastpatcher gives:

err no device found

what do you think? Am i at least clear?? Any explenations on using life cd on linux?? what does chronom means talking aboud using OF?? what is OF??
nezGypest
Posts: 2
Joined: Wed Aug 07, 2019 10:08 am

Toshiba 5540C error CE40 CA00

Postby nezGypest » Tue Aug 13, 2019 9:16 pm

Здравствуйте
Может быть у меня схожая проблема, модель 2506, при выполнении EASY SETUP / SET A4 / LT IN DRAWER / PRESS OK не печатает диаграмму или тестовое изображение, а выдает чистый лист, соответственно после EASY SETUP / SET TEST CHART / CLOSE COVER / PRESS OK сканер ездит, но ничего не происходит и появляется EASY SETUP / ADJUSTMENT ERROR / PRESS OK TO AGAIN.
Все выполнялось в рамках EASY SETUP пошагово, с картриджа защитная лента снята...

Что делать? Как запустить это чудовище?

П.С. Да, аппарат запускается первый раз новый.

Return to “Toshiba”

Who is online

Users browsing this forum: No registered users and 0 guests