Canon iR Advance 400iF/ 500iF Paper jam in solid image

User avatar
Expert
Posts: 7
Joined: Sat Oct 21, 2017 9:35 pm

Canon iR Advance 400iF/ 500iF Paper jam in solid image

Postby Expert » Sat Oct 28, 2017 12:07 pm

Models list: Canon imageRUNNER ADVANCE 500iF, 500i, 400i, 400iF
Paper jam in solid image when the leading edge margin is small (1 to 4mm)
Location
Fixing Assembly

Cause
When handling a solid image with small leading edge margin (1 to 4mm), it causes poor paper separation from the Fixing Film and paper jam can occur by separation failure.

Condition
Paper left untouched in a high humidity environment, solid image with small leading edge margin

Field Remedy
• Service mode (Lv.2)> COPIER> OPTION> FEED-SW> SP-SW> 0 to 2
0: OFF
1/2: Separation priority mode
• Or Service mode (Lv.2)> COPIER> OPTION> IMG-FIX> TMP-TBLC> 0 to 3
0: Auto
1: OFF
2: N1 mode with plain paper 1/2 (Target temperature becomes low.)
3: N3 mode with plain paper 1/2 (Target temperature becomes moreover low.)
* Selecting "SP-SW > 1/2" or "TMP-TBLC > 3" makes a wider leading edge margin and
avoids paper jam by separation failure.
* Selecting "TMP-TBLC > 2/3" also improves paper curl; however, it reduces productivity
TimothywaB
Posts: 7
Joined: Fri Jan 25, 2019 7:39 am
Location: Denmark
Contact:

Canon iR Advance 400iF/ 500iF Paper jam in solid image

Postby TimothywaB » Wed Feb 27, 2019 7:11 am

Models list: imageRUNNER ADVANCE 500iF, 500i, 400i, 400iF
Image Failure: Toner soiling at the back side of paper
LocationFixing Assembly circumference of Pressure Roller: 94mm
Transfer Roller roller circumference: 50mm
CauseFixing Assembly: Toner on the paper comes off and adheres to the Pressure Roller, and then the toner adheres to the back side of the paper.
Transfer Roller: Toner remains on the Drum that has stopped at the time of paper jam, and then the residual toner on the Drum adheres to the Transfer Roller during a recovery operation.
ConditionFixing Assembly: Under conditions that causes poor fixing performance, such as low temperature environment, or when feeding a large number of sheets of halftone image. Or the Fixing Unit comes to the end of its life for replacement.
Transfer Roller: When a paper jam occurs. Or the Transfer Roller comes to the end of its life for replacement
Field RemedyFixing assembly: Service modeLv.2> COPIER> FUNCTION> CLEANING> FIX-CLN> OK
Transfer Roller: Service modeLv.2> COPIER> FUNCTION> CLEANING> TR-CLN> OK
Henryemiva
Posts: 10
Joined: Sun Feb 03, 2019 12:50 am
Location: Sri Lanka
Contact:

Canon iR Advance 400iF/ 500iF Paper jam in solid image

Postby Henryemiva » Wed Mar 20, 2019 1:40 am

I apologise, but, in my opinion, you are not right. I am assured. Write to me in PM, we will discuss.
Krasnowekm
Posts: 2
Joined: Sun Aug 04, 2019 7:35 am

Canon iR Advance 400iF/ 500iF Paper jam in solid image

Postby Krasnowekm » Mon Sep 02, 2019 8:25 pm

я так понял используются тонер-картриджи Canon C-EXV49, те же что и на серии imageRUNNER Advance С33хх - про них что-то должно быть известно?
FORREST, а что по качеству печати можете на нем сказать? Что уже успели на нем попечатать?

Return to “Canon imageRUNNER ADVANCE 500/400”

Who is online

Users browsing this forum: No registered users and 0 guests