Konica Minolta bizhub 195

User avatar
Sam
Posts: 25
Joined: Sat Oct 21, 2017 9:42 pm

Konica Minolta bizhub 195

Postby Sam » Wed Feb 03, 2021 3:15 pm

Error code C9401
How reset?
Zeeshan
Posts: 28
Joined: Mon Feb 01, 2021 1:03 pm

Re: Konica Minolta bizhub 195

Postby Zeeshan » Fri Feb 12, 2021 2:15 am

Hi Konica 195 (C6101) error Cleaned the class also can't solve .. How to solve this code?
User avatar
Serviceman
Posts: 83
Joined: Sat Oct 21, 2017 9:37 pm

Re: Konica Minolta bizhub 195

Postby Serviceman » Fri Feb 26, 2021 9:03 am

Sam wrote:Error code C9401

Code: C9401
IR exposure lamp malfunction
  • When the power switch is turned ON or a scan operation is completed, the light quantity is checked and the shading compensation is performed. At this time, trouble is detected.
Solution:
  1. Turn OFF and ON the power switch.
  2. Check the connector between CIS-MFPB P102 for proper connection and correct as necessary.
  3. Change CIS
  4. Change MFPB.
User avatar
Serviceman
Posts: 83
Joined: Sat Oct 21, 2017 9:37 pm

Re: Konica Minolta bizhub 195

Postby Serviceman » Fri Feb 26, 2021 9:05 am

Zeeshan wrote:Hi Konica 195 (C6101) error Cleaned the class also can't solve

Code: C6101
Scanner home detection failure
  • When the power switch is turned ON or a scan operation is completed, detecting the home position fails.
Solution:
  1. Turn OFF and ON the power switch.
  2. Check the connector between M3-MFPB P101 for proper connection and correct as necessary.
  3. Check M3 for correct drive coupling and correct as necessary.
  4. Check the connector between CIS-MFPB P102 for proper connection and correct as necessary.
  5. M3 operation check.
  6. Change M3.
  7. Change CIS.
  8. Change MFPB.

Return to “Konica Minolta bizhub”

Who is online

Users browsing this forum: No registered users and 2 guests