Canon iR Advance 400i

Sunil
Posts: 31
Joined: Mon Feb 01, 2021 1:08 pm

Canon iR Advance 400i

Postby Sunil » Tue Sep 14, 2021 2:42 pm

My copier Canon iR Advance 400i error 110-0002
Please, give me remedy for resolve this issue.
Alvin
Posts: 41
Joined: Mon Feb 01, 2021 12:31 pm

Re: Canon iR Advance 400i

Postby Alvin » Wed Sep 15, 2021 11:46 am

E110 - Laser Scanner error
Code: E110-0001
Laser Scanner Motor rotation error
After startup of the Laser Scanner Motor, the speed lock signal of the Laser Scanner Motor was not detected although a specified period of time had passed.
*When the same status was detected again after executing an error retry.
Solution:
  1. Check the connector connection between the Laser Scanner Unit and the DC Controller PCB (PCB1).
  2. Replace the Laser Scanner Unit.
  3. Replace the DC Controller PCB (PCB1).
Code: E110-0002
Laser Scanner Motor rotation error
After the speed lock of the Laser Scanner Motor settled, the speed lock signal was not detected 10 times in a row at intervals of 100msec.
*When the same status was detected again after executing an error retry.
Solution:
  1. Check the connector connection between the Laser Scanner Unit and the DC Controller PCB (PCB1).
  2. Replace the Laser Scanner Unit.
  3. Replace the DC Controller PCB (PCB1
Code: E110-0003
Laser Scanner Motor rotation error
The speed lock signal of the Laser Scanner Motor was not detected although 6.5 seconds (when switching from low speed to normal speed) or 8.0 seconds (when switching from normal speed to low speed) had passed.
*When the same status was detected again after executing an error retry.
Solution:
  1. Check the connector connection between the Laser Scanner Unit and the DC Controller PCB (PCB1).
  2. Replace the Laser Scanner Unit.
  3. Replace the DC Controller PCB (PCB1).

Return to “imageRUNNER Advance, iR Advance”

Who is online

Users browsing this forum: No registered users and 2 guests