Canon iR2318

Alvaro
Posts: 61
Joined: Sat Oct 21, 2017 9:55 pm

Canon iR2318

Postby Alvaro » Thu Oct 07, 2021 3:46 pm

How to solve jam code 0104?
Malik
Posts: 48
Joined: Mon Feb 01, 2021 12:02 pm

Re: Canon iR2318

Postby Malik » Thu Oct 07, 2021 3:56 pm

Canon iR2318, iR2320, iR2420
Jam Codes (Related to Printer Unit)
Code: 0104
Delay jam in paper pickup section
Sensor: SR209
The registration sensor cannot detect the leading edge of paper from the moment paper pickup starts to the moment the jam detection time is reached.

Code: 0208
Stationary jam in paper pickup section
Sensor: SR209
The registration sensor cannot detect the no paper status specified time before the leading edge of the picked up paper reaches this sensor.

Code: 010c
Delay jam in deliver section
Sensor: SR202, SR203, SR209
  • The fixing delivery sensor cannot detect presence of paper within the specified time after turning on of the registration clutch.
  • The fixing delivery sensor detected absence of paper within the specified time after the sensor had detected presence of paper within the specified time after turning on of the registration clutch.
  • The No.1 delivery sensor cannot detect presence of paper within the specified time after turning on of the fixing delivery sensor
Code: 0210
Stationary jam in delivery section
Sensor: SR202, SR203
  • The fixing delivery sensor cannot detect absence of paper within the specified time after turning off of the registration clutch.
  • The fixing delivery sensor cannot detect absence of paper within the specified time after the sensor detected the leading edge of paper.
  • The No.1 delivery sensor cannot detect absence of paper within the specified time after the sensor detected the leading edge of
    paper.
Code: 0214
Stationary jam in machine
Sensor: SR202, SR203, SR209
Paper was detected in the paper transport path during initial rotation, during automatic delivery, at the end of cleaning, or at reception of an emergency stop command.

Code: 1118
Door open jam
Sensor: SR202, SR203, SR209, SW2, SW3
The door was opened when there was printing paper in the transport path.
Malik
Posts: 48
Joined: Mon Feb 01, 2021 12:02 pm

Re: Canon iR2318

Postby Malik » Thu Oct 07, 2021 5:25 pm

Canon iR2318, iR2320, iR2420
Jam Codes (Related to Finisher)
Code: 0130
Delayed feed jam
Sensor: PI5
The inlet sensor is not turned on within the specified time after reception of a paper ejection signal from the host machine.

Code: 0231
Staying paper jam
Sensor: PI5
The inlet sensor is not turned off even if paper is fed by the specified distance after the leading edge of the paper from the host machine has passed through the sensor.

Code: 0033
Stack ejection jam
Sensor: PI1
When a paper stack is ejected, the HP sensor is not turned off within the specified time.

Code: 0035
Staple jam
Sensor: Stapler HP sensor (built in stapler)
The stapler HP sensor was turned off once after start of stapler operation, but the HP has not been reached within the specified time.

Code: 1036
Power-on jam
Sensor: PI5
The inlet sensor detected paper at power-on.

Code: 1137
Door open jam
Sensor: SW1
The front cover switch detected opening of the front cover during standby or copy operation.
Malik
Posts: 48
Joined: Mon Feb 01, 2021 12:02 pm

Re: Canon iR2318

Postby Malik » Thu Oct 07, 2021 5:31 pm

Canon iR2318, iR2320, iR2420
Jam Codes (Related to ADF)
Code: 0007
Initial stationary
Sensor: PI6,PI7,PI8
Paper is detected in the transport path before the DADF starts initial operation.

Code: 0008
Read sensor delay
Sensor: PI7,PI8
The read sensor does not detect paper when the paper has been fed by the predetermined distance since reception of a pickup request.

Code: 0009
Read sensor stationary
Sensor: PI7
The trailing edge of paper is not detected when the paper has been fed by the predetermined distance since detection of it by the read sensor.

Code: 000a
Paper absence (Pull out the document.)
Sensor: PI11
The Document set sensor has been held off since start of pickup.

Code: 000c
Delivery reversal sensor delay
Sensor: PI6,PI7
The delivery reversal sensor does not detect paper since the paper has been fed by the predetermined distance since the read sensor
was turned on.
Malik
Posts: 48
Joined: Mon Feb 01, 2021 12:02 pm

Re: Canon iR2318

Postby Malik » Thu Oct 07, 2021 7:25 pm

Canon iR2318, iR2320, iR2420
Jam Codes (Related to Duplex Unit)

Code: 0120
Delay jam at duplex paper sensor 1
Sensor: SR1002
The duplex paper sensor 1 does not turn on within the specified time after the delivery sensor on the main unit side turns on.

Code: 0124
Delay jam at duplex paper sensor 2
Sensor: SR1003
The duplex paper sensor 2 does not turn on within the specified time after the duplex reverse motor starts.

Code: 0221
Stationary jam at duplex paper sensor 1
Sensor: SR1002
  • The duplex paper sensor 1 does not turn off when the specified time has lapsed since the duplex paper sensor 2 turned on.
  • The duplex paper sensor 1 does not turn off when the paper with a longitudinal length of 280 mm reaches the standby position (about 90 mm from the duplex paper sensor 2).
Code: 0228
Stationary jam at duplex paper sensor 2
Sensor: SR1003
The duplex paper sensor 2 does not turn off when the specified time has lapsed since the feed motor started.

Return to “imageRUNNER, iR”

Who is online

Users browsing this forum: No registered users and 2 guests