varioPrint 135

[Sam]

Error code 6132.
What can I do?

[Frank]

Error code "6132 Replace fusebelt"
This error is displayed when the the life cycle of the "TTF belt" is reached.

Solution:

1. Reset MORPE in service mode.
   (Machine Operator Recoverable Perman-tent Error)
2. Replace the "TTF belt"
3. Replace the "Counter pressure belt"
4. Replace the "Spiral cleaner counter pres-sure belt"
5. Replace the "Preheater belt"
6. Before leaving service mode:
   
   • The value of the TTF belt mainte-nance counter must be 0 (check in SDS: Maintenance Coun-ters/printer/Warm PRocess/Numberof images with fuse belt).
   • The machine state must be sleep mode (in service mode called: Print enginestate off).