Page 1 of 1

Canon iR Advance 400iF/ 500iF Poor transfer of the image, hollow character

Posted: Sat Oct 28, 2017 11:30 am
by Serviceman
Models list: Canon imageRUNNER ADVANCE 500iF, 500i, 400i, 400iF
Image Failure: Poor transfer of the image, hollow character
Location
    Transfer Roller (roller circumference: 50mm)
Cause
    • Because of insufficient transfer output due to highly-resistive paper caused by reduced moisture content in paper by having the paper left untouched in a low humidity environment
    • Because of insufficient transfer output due to highly-resistive paper caused by increased moisture content in paper by having the paper left untouched in a high humidity environment
Condition
    • Paper left untouched in a low humidity environment
    • Paper left untouched in a high humidity environment
Field Remedy
    • Service mode (Lv.2)> COPIER> OPTION> IMG-TR> TROPT-SW> -2 to 1
    -2: Transfer output voltage moreover decreases.
    -1: Transfer output voltage decreases.
    0: OFF
    1: Transfer output voltage increases.

Canon iR Advance 400iF/ 500iF Poor transfer of the image hollow character

Posted: Tue Sep 03, 2019 6:49 pm
by BeJimmieBug
Hi,
i think i prefer the canon 60d over the canon t4i because of the robust built of the 60d.

I was wondering if the weight of the camera canon 60d would help for stabilization . Since the t4i is less heavy, i think the stabilization is harder.

Does the weight of the camera make a huge difference ?

I use a lens of 15-85mm

Thanks in advance
Have a great day
Deleuze3