Search found 7 matches

by Expert
Sat Oct 28, 2017 12:15 pm
Forum: Canon imageRUNNER ADVANCE 500/400
Topic: Canon iR Advance 400iF/ 500iF The toner bottle set lever cannot be operated
Replies: 0
Views: 195

Canon iR Advance 400iF/ 500iF The toner bottle set lever cannot be operated

Models list: Canon imageRUNNER ADVANCE 500iF, 500i, 400i, 400iF The toner bottle set lever cannot be operated or is hard to operate Location Toner bottle set lever Cause • When sealing force of the Toner Bottle Cap is large although it is within the specified range, the lever operation force to open...
by Expert
Sat Oct 28, 2017 12:11 pm
Forum: Canon imageRUNNER ADVANCE 500/400
Topic: Canon iR Advance 400iF/ 500iF Jam with thin paper
Replies: 0
Views: 102

Canon iR Advance 400iF/ 500iF Jam with thin paper

Models list: Canon imageRUNNER ADVANCE 500iF, 500i, 400i, 400iF Jam with thin paper (63g/m2 or lighter) Location Photosensitive Drum, Fixing Assembly Cause Separation performance drops due to weak rigidity of paper, which causes paper jam at the Cleaner Assembly or Fixing Assembly by separation fail...
by Expert
Sat Oct 28, 2017 12:07 pm
Forum: Canon imageRUNNER ADVANCE 500/400
Topic: Canon iR Advance 400iF/ 500iF Paper jam in solid image
Replies: 0
Views: 88

Canon iR Advance 400iF/ 500iF Paper jam in solid image

Models list: Canon imageRUNNER ADVANCE 500iF, 500i, 400i, 400iF Paper jam in solid image when the leading edge margin is small (1 to 4mm) Location Fixing Assembly Cause When handling a solid image with small leading edge margin (1 to 4mm), it causes poor paper separation from the Fixing Film and pap...
by Expert
Wed Oct 25, 2017 12:46 pm
Forum: Brother
Topic: Brother MFC7880DN Toner Problems
Replies: 0
Views: 200

Brother MFC7880DN Toner Problems

New toner is not detected - Check that the packaged toner cartridge is not set. - Check that a new (not used) toner cartridge is set. - Check that the genuine toner cartridge is set. Cause: New toner actuator coming off Remedy: Reattach the new toner actuator. Cause: Connection failure of the new t...
by Expert
Mon Oct 23, 2017 11:23 pm
Forum: Samsung
Topic: Samsung Xpress M2070 Vertical Black Line
Replies: 1
Views: 250

Re: Samsung Xpress M2070 Vertical Black Line

Cause • Damaged develop roller in the toner cartridge. Deformed Doctor-blade or cleaning-blade. • Scratched surface of the charge roller in the toner cartridge. Solution Replace the toner cartridge. Cause • Partly depression or deformation on the surface of the transfer roller. Solution Replace the...
by Expert
Mon Oct 23, 2017 11:03 pm
Forum: Lexmark
Topic: Lexmark CX725 gray background
Replies: 1
Views: 195

Re: Lexmark CX725 gray background

Step 1 a From the home screen, touch Settings > Reports > Device > Device Statistics. b Check the status of the imaging unit if it was recently replaced. Does the status show that the imaging unit was recently replaced? Yes: Go to step 2 Go to step 3 Step 2 Check if only one color is producing the b...
by Expert
Mon Oct 23, 2017 9:58 pm
Forum: HP
Topic: HP LaserJet Enterprise 600 M601 error 59.00.70
Replies: 1
Views: 207

Re: HP LaserJet Enterprise 600 M601 error 59.00.70

59.00.YY - A motor error has occurred. 59.00.70 - Drum motor (M102) failure (start-up or rotational) Action: 1. Reconnect the connector (J187) on the drum motor and the connector (J87) on the DC controller PCA. 2. Use the drum motor (M102) drive test in the Component test to verify that the motor is...

Go to advanced search