Xerox WorkCentre 7346
Service Mode. Delete All Data
Purpose
This procedure deletes user-defined/registered information and information recorded automatically by the system from the hard disk, the Controller (ESS) NVM PWB and Buffer RAM.
CAUTION
This procedure also Initializes Sys System, IOT NVM, and IIT NVM resulting in loss of the factory setups for System Registration, Image Quality and the Scanner setups
Procedure
- Enter UI Diagnostic mode (Accessing UI Diagnostics).
- Select Delete All Data.
- Select Start.
- A confirmation message appears. Select Yes.
- The Deleting data. message appears.
- When the message indicating the completion appears, exit UI Diagnostic mode, Switch off the power, then switch on the power.