Xerox WorkCentre 6655
General Procedures. GP 03 Customer Administration Tools
Purpose
To gain access to customer administration tools.
How to Enter Customer Administrator Tools
Perform the following:
- Select login / out on the key pad or select guest on the UI.
- Enter User Name ‘admin’ (case sensitive).
- Select Next.
- Enter the Password ‘1111’ (default setting).
- Select Done.
- Select Machine Status key, to access the customer administration scree
When the machine is password protected use Service Copy Mode (GP 5) to access device, network settings. Perform the following:
NOTE:
Not all Admin settings are available while logged in as CSE.
- Press and hold the # key, * key and the Stop key.
- Enter the passcode 2732.
- Select Enter.
- Select Machine Status key then Tools tab. To access the customer administration screen.
NOTE:
After entering customer administration tools, all existing copy jobs are cancelled. The network controller will stop accepting jobs and a ‘Offline’ screen message is displayed. When exiting service mode an ‘Online’ screen message is displayed.
The tools menu map is also available in the information pages. Select Machine Status / Machine Information / Information Pages and select the Tools Menu Map.
The customer administration Tools menu contains the following features:
- Device Setting - Table 1
- Service Setting - Table 2
- Network Setting - Table 3
- Accounting Setting - Table 4
- Security Setting - Table 5
- Troubleshooting - Table 6