Xerox WorkCentre 6605
Troubleshooting. Image Quality. Streaked output
Possible causative parts
• Toner Cartridge Y/M/C/K (PL5.1.8/PL5.1.9/PL5.1.10/PL5.1.11)
• Imaging Unit Y/M/C/K (PL8.1.2/PL8.1.3/PL8.1.4/PL8.1.5)
• Transfer Belt Assembly (PL6.1.1)
• Scanner Assembly (PL51.1.1)
| St | Action | Yes | No |
|---|---|---|---|
| Is the unit under test an MFP? | Go to action 1. | Go to action 4. | |
| 1 | Check the error mode. Does the error occur when copying or scanning? |
Go to action 2. | Go to action 4. |
| 2 | Check the original. Is the original color clean? |
Go to action 3. | Change the original. |
| 3 | Clean up ADF Glass and White strip of the Scanner with a clean dry cotton swab. Does the error occur when copying or scanning? |
Go to action 4. | End. |
| 4 | The toner cartridges may be low or need to be replaced. Confirm the amount of toner left in each toner cartridge. Replace the toner cartridges as necessary. Does this solve your problem? |
The task is complete. | Go to action 5. |
| 5 | Replace the Imaging Units. Does this solve your problem? |
The task is complete. | Go to action 6 |
| 6 | Check the intermediate transfer belt. Is the Transfer Belt Assembly not dirty, damaged, or worn, and does it work correctly? |