Xerox WorkCentre 6605
Troubleshooting. Image Quality. Random spots/Blurred images
Possible causative parts
• Toner Cartridge Y/M/C/K (PL5.1.8/PL5.1.9/PL5.1.10/PL5.1.11)
• Imaging Unit Y/M/C/K (PL8.1.2/PL8.1.3/PL8.1.4/PL8.1.5)
• Transfer Roller (PL14.1.99)
• Transfer Belt Assembly (PL6.1.1)
• Development HVPS Board (PL18.1.14)
• Transfer HVPS Board (PL18.1.28)
| St | Action | Yes | No |
|---|---|---|---|
| 1 | Ensure that the toner cartridges are installed correctly. Does this solve your problem? |
The task is complete. | Go to action 2. |
| 2 | Ensure that the Imaging Units are installed correctly. Does this solve your problem? |
The task is complete. | Go to action 3. |
| 3 | Replace the Imaging Units. Does this solve your problem? |
The task is complete. | Go to action 4. |
| 4 | Check the Transfer Roller. Is Transfer Roller not contaminated, damaged, or worn, and does it work correctly? |
Go to action 5. | Reinstall Transfer Roller. |
| 5 | Check the Transfer Roller. Is Transfer Roller not contaminated, damaged, or worn, and does it work correctly? |
Go to action 6. | Replace Transfer Roller. |
| 6 | Check the Transfer HVPS Board connector connection. Is the Transfer HVPS Board connector connected correctly? |
Go to action 7. | Connect the connector. |
| 7 | Check the Development HVPS Board connector connection status. Is the Development HVPS Board connector connected correctly? |
Go to action 8. | Connect the connector. |
| 8 | Check the intermediate transfer belt. Is the Transfer Belt Assembly not contaminated, damaged, or worn, and does it work correctly? |
Contact Xerox Technical Support. | Replace the Transfer Belt Assembly. |