Xerox WorkCentre 6605
Service Mode. Monitor Test
Digital Output checks whether the digital output (DO) components function properly. You can switch each DO component to ON and check the operation separately, which helps you judge which component functions normally. You can operate all components at one time in the Digital Output Test. If you open the interlock while a motor test is being executed, the operation of each component will be stopped.
Note: Except for 010-001, 042-001, 042-002, set LVPS 24V to On (041-001) first.
Monitor Test Parameter Table
Chain | Link | Component |
---|---|---|
010 | 001 | Fusing Relay |
041 | 001 | Low Voltage Power Supply 24V |
042 | 001 | Main Fan (Normal) |
042 | 002 | Main Fan (Half) |
061 | 001 | ROS Motor |
071 | 001 | Main Motor (Normal) |
071 | 002 | Main Motor (Half) |
071 | 004 | Paper Transport Motor (Normal) |
071 | 005 | Paper Transport Motor (Half) |
071 | 007 | Bypass Tray Feed Solenoid |
071 | 008 | Tray1 Feed Clutch |
071 | 009 | Take Away2 Clutch |
071 | 010 | Regi Clutch |
071 | 011 | Exit Clutch |
071 | 012 | Exit Clutch2 |
071 | 013 | Duplex Clutch |
071 | 014 | Option Feeder1 Motor (Normal) |
071 | 015 | Option Feeder1 Motor (Half) |
071 | 017 | Option Feeder2 Motor (Normal) (not in use) |
071 | 018 | Option Feeder2 Motor (Half) (not in use) |
071 | 020 | Option Feeder1 Feed Clutch |
071 | 021 | Option Feeder2 Feed Clutch (not in use) |
071 | 022 | Option Feeder1 Take Away Clutch |
071 | 023 | Option Feeder2 Take Away Clutch (not in use) |
093 | 001 | Developer Motor (Normal) |
093 | 002 | Developer Motor (Half) |
093 | 004 | Yellow Toner Dispense Motor (Normal) |
093 | 005 | Yellow Toner Dispense Motor (Half) |
093 | 006 | Magenta Toner Dispense Motor (Normal) |
093 | 007 | Magenta Toner Dispense Motor (Half) |
093 | 008 | Cyan Toner Dispense Motor (Normal) |
093 | 009 | Cyan Toner Dispense Motor (Half) |
093 | 010 | Black Toner Dispense Motor (Normal) |
093 | 011 | Black Toner Dispense Motor (Half) |