Xerox WorkCentre 6027 MFP
Troubleshooting. Image Quality 02
Light Print
- Reset the print driver Image Settings (Brightness and Contrast) to the default settings.
- In the printer Printing Preferences menu Advanced tab, check that Draft Mode is not selected.
- If you are printing on an uneven print surface, change the Paper Type setting in the printer driver to increase the paper type one higher.
- Check that the correct media is being used.
- Non-Xerox toner used?
Replacement Note: When replacing a non-Xerox toner cartridge with a Xerox Toner cartridge, multiple prints may be necessary to clear out the old toner for improved print quality.
Entire page is White or one color is missing from image.
- Ensure the packaging material is Removed from the Toner Cartridge
- Check the Toner Cartridge to make sure that it is installed correctly.
- Verify the Bias Transfer Roller is correctly installed
Toner Smears
- •If you are printing on an uneven print surface, change the Paper Type setting in the printer driver to increase the paper type one higher.
- Verify that the paper is within the printer specifications.
- Adjust the Fuser temperature.