Xerox WorkCentre 6025 MFP

Light Print

 

• Reset the print driver Image Settings (Brightness and Contrast) to the default settings.
• In the printer Printing Preferences menu Advanced tab, check that Draft Mode is not selected.
• If you are printing on an uneven print surface, change the Paper Type setting in the printer driver to increase the paper type one higher.
• Check that the correct media is being used.
• Non-Xerox toner used?

Replacement Note: When replacing a non-Xerox toner cartridge with a Xerox Toner cartridge, multiple prints may be necessary to clear out the old toner for improved print quality.

Entire page is White or one color is missing from image.

• Ensure the packaging material is Removed from the Toner Cartridge
• Check the Toner Cartridge to make sure that it is installed correctly.
• Verify the Bias Transfer Roller is correctly installed

Toner Smears

• •If you are printing on an uneven print surface, change the Paper Type setting in the printer driver to increase the paper type one higher.
• Verify that the paper is within the printer specifications.
• Adjust the Fuser temperature.