Xerox WorkCentre 5335

Procedure

1. Enter UI Diagnostic mode (Accessing UI Diagnostics). Select Initialize NVM. Selections for the following subsystems appear:
   • IOT
   • Output (Finisher)
   • IISS (IIT/IPS)
   • IISS-Extension
   • Input Device
   • Sys-SYSTEM
   • Sys-USER
2. Select the subsystem to be initialized and select Start.
   CAUTION
   All NVM for the selected subsystem will be reset to the default values. Any machine-specific, region-specific, or customer-specific information will need to be re-entered. Make sure that this information is available before proceeding.
3. A confirmation message appears. Select Yes.
4. A message indicating completion will appear.
5. Select the Confirm button.

This completes the initialization. Remember to re-enter any machine-specific NVM data.

NOTE: For a complete listing of accessible NVM locations, refer to the NVM Tables in the Library section