-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Xerox WorkCentre 5225
Troubleshooting. Image Quality. IQ05 Residual Image (Ghosting) RAP
Ghost images appear on the paper. Parts of the previous page or current page appear as ghost images on the paper.
Step |
Procedure |
Yes |
No |
1 |
Remove the Xero/Developer Cartridge (PL 4.1) and reinstall. Turn the power Off/On and print. The problem reoccurs. |
2 |
End |
2 |
Install a new Xero/Developer Cartridge (PL 4.1). Turn the power Off/On and print. The problem reoccurs |
3 |
End |
3 |
Remove the Fuser Unit (PL 5.1). Check for dirt on the surface of the Heat Roll. The surface of the Heat Roll is clean. |
4 |
Clean the Heat Roll. If there is difficulty in removing the dirt, replace the Fuser Unit (PL 5.1) |
4 |
Replace the MCU PWB (PL 9.1). If the problem persists, replace the ESS PWB (PL 9.1). |
|
|