Xerox WorkCentre 5222

Printed images are not properly fused onto the paper. The images come off easily when rubbed.

Step	Procedure	Yes	No
1	Check the paper type. Paper used is within specifications.	2	Use paper within specifications.
2	Use paper stored under room conditions. The problem reoccurs.	3	End
3	Check the power supply voltage. The voltage is within the specified range.	4	Connect a power supply with voltage within the specified range.
4	Remove the Fuser Unit (PL 5.1) and reinstall. The problem reoccurs.	5	End
5	Check the fusing temperature using the Diagnostics. A normal fusing temperature is set.	6	Set a normal fusing temperature.
6	Replace the Fuser Unit (PL 5.1).