Xerox WorkCentre 5024
Service Mode. 2.8 DATA All Delete
Purpose
Erases the customer's data in the machine for security reasons when a PWB was replaced, the machine was removed, etc.
DATA All Delete (Controller NVM)
Purpose
To initialize the following data that are stored in the ESS/MCU PWB.
• Job History
Procedure
- Enter the CE Diag Mode and input 999-970 in the Chain-Link.
- Pressing <Start> displays the initialization confirmation on the UI.
• To initialize, press <Start> to start the initialization.
• To cancel initialization, press <Clear (C)> to return to the [Diagnostics Mode Base] screen. - Perform the initialization. When the initialization has completed, [Done] will be displayed.
- Pressing <Clear (C)> returns you to the [Diagnostics Mode Base] screen.
DATA All Delete (Fax NVM)
Purpose
To initialize the following data that are stored in the Fax Kit.
- Local Terminal Information
- Telephone Book
- Jobs Stored for Transmission Information
- Various Reports
- Sending Data
- Receiving Data
- System Parameter (Default Value for each Market)
Procedure
- Enter the CE Diag Mode and input 825-730 in the Chain-Link.
- Pressing <Start> displays the initialization confirmation on the UI.
• To initialize, press <Start> to start the initialization.
• To cancel initialization, press <Clear (C)> to return to the [Diagnostics Mode Base] screen. - Perform the initialization. When the initialization has completed, [Done] will be displayed.
- Pressing <Clear (C)> returns you to the [Diagnostics Mode Base] screen.