Xerox WorkCentre 5024
Service Mode. 2.6 Maintenance Report
Purpose
Prints the Maintenance items that can be set from and displayed on the CE Mode.
Procedure
- Enter the CE Diag Mode and input 999-980 in the Chain-Link.
- Pressing <Start> prints the Maintenance Report using the following settings.
• 1 Sided Print - fixed. (The Maintenance Report cannot be printed using 2 Sided.)
• Quantity: 1 - fixed. - When this is in progress, the message [In progress] is displayed on the UI.
- Once the Maintenance Report has been printed, [Done] will be displayed on the UI.
- Pressing <Clear (C)> returns you to the [Diagnostics Mode Base] screen.