Xerox WorkCentre 5024
Service Mode. 2.4 NVM Initialize
Purpose
Returns the NVM to its default values.
Procedure
- Enter the CE Diag Mode.
- Input the Chain-Link No. of the item to initialize.
Chain-Link Type Overview 999-990 NVM Initialize - Controller Initializes the NVM of the Controller. 999-991 NVM Initialize - Network Initializes the NVM of the Network. 999-992 NVM Initialize - IIT Initializes the NVM of the IIT. 999-993 NVM Initialize - MCU Initializes the NVM of the MCU. 999-994 NVM Initialize - DADF Initializes the NVM of the DADF. 999-995 NVM Initialize - Fax Initializes the NVM of the Fax. 999-999 NVM Initialize - All Area Initializes the NVM of all areas. - Pressing <Start> displays the initialization confirmation on the UI.
• To initialize, press <Start> to start the initialization.
• To cancel initialization, press <Clear (C)> to return to the [Diagnostics Mode Base] screen. - Perform the initialization. When the initialization has completed, [Done] will be displayed.
- Pressing <Clear (C)> returns you to the [Diagnostics Mode Base] screen.