Xerox WorkCentre 5024
Service Mode. 2.3 Analog Monitor
Purpose
Monitors the A/D converted analog value of the sensor while each component is being operated.
NOTE: For more details on the Analog Monitor Code
Procedure
- Enter the CE Diag Mode.
- Input the Chain-Link No. and press <Start>.
- The current analog value is displayed.
• When the Analog Monitor is in progress, the message [In progress] is displayed on the UI.
• The analog value of the monitored component is displayed on the UI with a refresh rate of 3 times per second
• It is not possible to input several Chain-Link No. at the same time to perform monitoring.
• As there is no item with automatic timeout, the process will run until <Stop> is pressed. - Pressing <Stop> displays [Done] on the UI.
- Pressing <Clear (C)> returns you to the [Diagnostics Mode Base] screen.