Xerox WorkCentre 5024
Service Mode. 2.2 NVM Read / Write
Purpose
Refers to the NVM data or changes setting value.
NOTE: For details on NVM No. (Chain-Link)
Procedure
- Enter the CE Diag Mode.
- Input the Chain-Link No. and press <Start>.
NOTE: E.g.) The machine does not accept [700-6] as an abbreviation of [700-006]. When a number starts with '0', the '0' must be input. - The current NVM setting value is displayed.
- For an NVM that can have its setting value changed, use the keypad to input the setting value and press <Start>.
• The value that was input can be cleared by pressing <Clear (C)>.
• To input a negative number, insert '*' at the beginning of the input.
NOTE: If an invalid value was input, an [Error] screen will be displayed. Press <Clear (C)> to return to the [Diagnostics Mode Base] screen. - The changed NVM setting value is displayed.
- Pressing <Clear (C)> returns you to the [Diagnostics Mode Base] screen.