Xerox WorkCentre 5024

The UI displays the CE Diag Mode as a [4-Line LCD] screen.

UI Screen

The structure of the CE Diag Mode is as follows.
Enter the CE Diag Mode and sort through the diagnostic functions by inputting the Chain-Links on the [Diagnostics Mode Base] screen.

1. Shutdown History
   • Initialize Fault History
2. NVM Read / Write
3. Analog Monitor
4. NVM Initialize
5. Component Check
6. Maintenance Report
7. HFSI Counter Clear/Initialize
8. DATA All Delete
   • DATA All Delete (Controller NVM)
   • DATA All Delete (Fax NVM)
9. Test Pattern Print
10. ATC Check
11. Tone Up / Down
    • Tone Up
    • Tone Down
12. Read Temperature
13. IIT Calibration
    • Auto Shading (Platen)
    • Auto Shading (DADF BW)
    • Auto Shading (DADF CL)
    • LED Calibration
14. IIT Breakdown Diagnosis
15. DADF Size Detect Auto Adjust
16. Self Test Settings (Fax)
    • Market Info Initialize
    • Factory Settings
17. Self Test Request (Fax)
    • Tonal Signal Test
    • Dial Pulse Test
    • DTMF Dial Pulse Test
    • DTMF Signal Test
    • Modem Signal Test
    • Parameter Check
    • RAM Check
    • RTC Check
    • NCU Relay On/Off Test
18. Billing Counter Check and Repair (621-400)