Xerox WorkCentre 5019

Purpose

Refers to the NVM data or changes setting value.

Procedure

1. Referring to NVM Data
   (1) Enter the CE Diag Mode.
   (2) Input the Chain-Link No. and press the [Start] button.
   (3) The current NVM setting value is displayed.
   • Numbers of 3 digits or fewer are displayed as right-justified. Numbers of 4 digits or more will initially have their upper 3 digits displayed as right-justified. Pressing the [Start] button allows you to switch the display to the lower digits.
   – When there is a next screen, the number will be displayed with a [triangle mark] at its heading.
   [ 123 456 ]
   [► 345]
2. Changing the Setting Value
   (1) Pressing the [Start] button when an NVM Read value is being displayed causes the currently displayed setting value to disappear and displays the cursor for inputting the setting value that it is to be changed to.
   [123 456]
   [ --- ]
   (2) Input the setting value by using the keypad causes the LED of the [Start] button to flash and prompt for a confirmation.
   • To input a negative value, press the [Cancel Scan Jobs] button to add a negative sign.
   • When the setting value is of 4 digits or more, only the least significant 3 digits will be displayed as it is being input. When inputting a number of 4 digits or more, the number will be displayed with a [triangle mark] at its heading.
   • When you need to re-input the setting value, the currently input value can be deleted one-by-one by pressing the [Clear] button.
   (3) Pressing the [Start] button again causes the LED of the [Start] button to turn ON and confirms the setting value.
   (4) Pressing the [Clear All] button returns you to the [Chain-Link Number Entry] screen.