Xerox WorkCentre 5019
Service Mode. 2.1.1 Initialize Fault History
Purpose
Initialize the Fault History.
Check the completed [Initialize Fault History] at the [System Fail History] of [ERROR History Report].
Procedure
- Enter the CE Diag Mode and input 998-980 in the Chain-Link.
- Pressing the [Start] button transitions to the [Check Initialization] screen. At this time, the [CLR] and the [Start] button will be flashing.
- Pressing the [Start] button starts the initialization of the [Fault History].
• An animation will be displayed to indicate that it is in progress. - When the initialization has completed successfully, [End] will flash twice -> remain ON to indicate the completion of the [Fault History] initialization.
- Pressing the [Clear All] button returns you to the [Chain-Link Number Entry] screen.