Xerox WorkCentre 5019

The UI displays the CE Diag Mode as a [7-Segment LCD] screen.

UI Screen

The structure of the CE Diag Mode is as follows.
Enter the CE Diag Mode and input the Chain-Link Number in the [Chain-Link Number Entry] screen to assign the Diag function.

1. Shutdown History
   • Initialize Fault History
   DATA All Delete
2. NVM Read/Write
3. Analog Monitor
4. Read Temperature
5. NVM Initialize
6. Component Check (IOT/IIT/DADF)
7. Maintenance Report
8. HFSI Counter Reset
9. HFSI Counter Read/Clear
10. Jam Counter Reset
11. DRUM Counter Reset
12. ATC Sensor Read
13. Tone Up/Down
    • Tone Up
    • Tone Down
14. Test Pattern Print
15. Checking and Repairing the Billing Counter (621-400)